HobbyKing
515MM MS COMPOSIT NEXUS 30 3D NIGHT BLADE
| Length | 515mm |
| Width | 49mm |
| Grip | 12mm |
| Hole | 4mm |
HobbyKing
BMS-705 LOW PROFILE HIGH TORQUE SERVO 6.0KG / .18SEC / 28G
| Weight | 28g / 0.99oz |
| Dimensions | 42 x 21.5 x 22 mm / 1.65 x 0.85 x 0.87 inch |
| Torque At 4.8V | 6.0kg/cm , 83 oz/in |
| Speed At 4.8V | 0.18 sec / 60° at no load |
5 Reviews
HobbyKing
KD REPLACEMENT SHAFT KIT 36-__XL
,
Replacement shaft kit for KD Motors. Comes with; 1 x ...5 Reviews
HobbyKing
600MM MS COMPOSIT 3D NIGHT MAIN BLADES
| Length | 600mm |
| Width | 52mm |
| Grip | 12mm |
| Hole | 4mm |
HobbyKing
3DSPINNER FOR HP-50 / DLE55 / DA50 / JC51 (41X41X26MM) SILVER
| Shaft size | 10mm |
| Bolt hole | 5mm |
5 Reviews
HobbyKing
X-BLADE PRECISION KNIFE WITH REPLACEABLE SK-5 BLADE
,
High strength steel SK-5 blade cuts through most materials with ...5 Reviews
HobbyKing
TURNIGY BELT DRIVE STARTER FOR 2-STROKE 160 & 110 SIZE GAS ENGINES
| Size | 192 x 80 x 113mm |
| Weight | 940g |
Engine class:, Airplane 2-stroke 160 class /Heli 2-stroke 110 class, *Note:, Do not use more than 18V,
Turnigy Starter for 2-stroke 160 & 90 Size Gas Engines. ...5 Reviews
HobbyKing
X8 R6 6CH 2.4GHZ RECEIVER (LONG ANTENNA)
| Size | 50 X 26 X 10mm (1.97 X 1.02 X 0.39 inch) |
Weight: 8g,
2.4GHz receiver for Assan X8 systems. Compatible with all X8 ...5 Reviews
HobbyKing
KD36-50-06S 5900KV BRUSHLESS INRUNNER (8T)
| Dimensions | 36~50mm |
| Shaft size | 5mm |
| Weight | 220g |
| Idle Current | 6.9A |
| Resistance | .0034 |
| Max Amp | 108A |
Kv: 5900rpm/V (8T),
The KD36 inrunners are equivilent to 540 size motors. Front ...5 Reviews
HobbyKing
CARBON FIBER COMPOSITE DIGITAL THICKNESS GAUGE 12MM
| Range | 0-12mm |
| Sorage Temp | -20~70Deg Celcius |
| Power | 1.5v Battery |
Features:, Made of extra strong carbon fiber composites, Resolution: .,
Light weight and durable. 8mm LCD display Suited for measuring ...5 Reviews
HobbyKing
SPARTAN AP-2000I - ADVANCED CCPM MIXER, DIGITAL CYCLIC RING AND FLIGHT STABILISER
| Swashplate types | 120deg CCPM, 140deg CCPM , 90deg CCPM (4 servo). Mechanically mixed swashplates are also supported. |
| Operating voltage | 4 - 10 Volts, current draw Compact design measures |
| Weight | 25 grams |
| Operating conditions | 0 to 50 deg C, 32 to 122 deg F, 20 to 85 % humidity not condensing. |
| Storage | -20 to 70 deg C, -68 to 158 deg F, 20 to 90 % humidity not condensing. |
General features:, Works with all PCM, PPM/FM and Spread Spectrum receivers and supports both digital and conventional servos., Specifications:,
The AP-2000i is one of the most advanced aeromodelling avionics ...5 Reviews
HobbyKing
ASSAN GA-410 TAIL LOCK GYRO
| Operating voltage | DC 3.3 ~ 9.0V |
| Operating current | 7mA |
| Operation temperature | -5C to 60C |
| Dimension | 27x27x20mm |
| Weight | 15g |
Sensor :, Quartz vibration sensor, Control system :, AVCS (Angular Vector Control System), Dual-Gain system :, Tail lock mode / normal mode, DIR function :, Use the reverse switch on the gyro to set the output direction, Limit function :, Use the travel rotary knob on the gyro to set the servo travelling range.,
The GA-410 is a dual-gain, advance featured, performance tail lock ...5 Reviews
HobbyKing
SPINNER FOR FOLDING PROP (SMALL)
| Diameter | 31mm |
Weight: 9g,
Spinner for folding Prop (Small) Collet style, will fit 2.3~2.5mm ...5 Reviews
HobbyKing
HOBBY KING 2.4GHZ 4CH TX & RX V2 (MODE 1)
Note:, Only HK-T6A receiver is comptible with HK-T4A transmitter.,
HobbyKing 2.4Ghz 4Ch Tx & Rx V2 (Mode 1)(THROTTLE ON ...5 Reviews
HobbyKing
DIGITAL SERVOLESS RETRACTABLE SYSTEM (1PC)
| Working voltage | 4.5~5.5V |
| Speed | 0.7s/60deg 4.8v - 0.55/60deg 6v |
| Idle current | 3mA |
| Angle limit | 90 degree when retracted |
| Operating temp | -10~50C |
| Shaft size | 3mm |
| Mounting area size | 35mm x 33mm |
| Length | 67mm |
Features:, Robust landing gear strut and mounting bracket,
The easiest way to put retracts in your plane. No ...5 Reviews